Welder Training; Challenges and Solutions for the Diving Industry

Welder Training – Challenges and solutions to Meet the Demands of the Diving Industry

For those that can, ‘do’ and for those that can’t, ‘teach’. How many times have we heard that one? Well, when it comes to teaching underwater welding skills, David Keats of Speciality Welds most certainly can ‘do’ and can ‘teach’. David, who is a fully qualified International Welding Technologist, Senior Welding Inspector (Zurich Insurance approved) professional member of TWI and a qualified instructor, has been instrumental in developing the UK’s only accredited qualification in wet welding and has been involved with the industry since 1983, where he worked as a wet and hyperbaric welder for all the major diving contractors of the day, including Subsea Offshore, Comex Holder, Oceaneering and Wharton Williams Taylor (2W’s).

The diving industry is somewhat unique in the way in which it operates with regards to employees. Unlike that of say, an engineering employer, who sets on an apprentice, obtains Government funding to send them to college; day release or full/part-time. They serve their time and are rewarded with a National Qualification. The diving industry mainly operates through sub-contract or self-employed routes and therefore, this ‘standard’ route to education and qualification is not available (unless already qualified). This places the emphasis for any qualifications firmly with the individual diver, not the employer; – the challenge! For this reason it’s absolutely essential that educational/industry recognition is available and provided. Welding is an important skill for the diving industry and such recognition/availability is essential.

Unfortunately, in welding the term ‘qualification’ has a specific meaning, which tends to be simply understood as a ‘coding’. i.e. a practical weld test in which the welder demonstrates his physical skills and abilities. Of course, this element of the welder’s ability is essential, after all, welding is a craft-skill and physical ability is a large part of the job. But remember, for the engineering industries, this physical skill is supplemented with a number of years at college; i.e. ONC/HNC/HND, etc and most importantly, a management structure exists where foreman, senior engineers, supervisors and inspectors are also employed by the company; thus total responsibility for welding, does not lay with the welder. This structure does not generally exist for the inshore diving industry, and even for offshore the hands-on expertise can be limited. A diver-welder may well find himself the only competent welding person on site, thus has to have greater expertise on the subject of welding than simply being able to deposit weld metal! Another problem for the diving industry is people are attracted to it from all sorts of backgrounds, with engineering being only a small minority. Thus, this physical skill factor, although crucially important, is not in itself sufficient to provide industry with the next generation of competent, skilled welder-divers, divers with a minimum standard of competency in welding; which needs to include; safety, techniques, materials, weldability, electrodes, terminology, plant/equipment, weld defects, standards, etc. etc. There is much more to welding than just burning rods!

Because most divers are self-employed, thus, solely responsible for their own training/qualifications, unless they put themselves through college, there is limited opportunity to develop the knowledge and skills necessary to meet future industry demands, or even progress and extend their knowledge base. As we all know, once you are in the workplace, it’s very difficult to then attend college.  To this end; – the solution. Speciality Welds have developed an 80 hour welding training programme, called The WeldCraft-Pro. This course follows the International Institute of Welding (IIW) and European Welding Federation (EWF) guidelines for fillet welding and the qualification is issued by EAL (EMTA Awards), who are the UK’s largest engineering and marine training authority, issuing over 80% of all the UK’s engineering qualifications.  In addition, the programme is also recognised by IMarEST, the Institute of Marine Engineering, Science and Technology. Senior spokesman Mr. Ben Saunders said.  “I can confirm that the members of IMarEST Continuing Professional Development (CPD) Working Group were most impressed by the course and have recognised it as contributing to an individual member’s professional development requirements.

This course is the only competency assessed underwater welding course available that meets all of industries current demands. Training is provided through approved diver training schools, allowing training to take place, for new recruits,  immediately after diver training, thus, eliminating the need to return to school. For existing divers, the training is as compact as possible, usually taking no more than 10.5 days.

It’s absolutely crucial industry attracts the right calibre of individual to our industry, but equally important, industry needs to ensure training exists to the right standard, so it can equip individuals with all the skills necessary to keep Britain with its head above water and hopefully, leading the field.B&A weld

6 responses to “Welder Training; Challenges and Solutions for the Diving Industry

  1. What’s a typical cost for going through the combined diver and wet welding training, and how likely is it that newly trained welder will be able to pick up work immediately?

    • The costs will depend upon the training provider. Although we are the authors of this course, we only set the training/audit rules for schools to deliver it, not the price. Thus, you will have to contact each school (see our website http://www.specialwelds.com for more info). Welding is a key skill for divers and you will do well in this industry having this skill, but its not possible to answer this question in details, far too many variables involved.

  2. Thanks for the courses you offer in welding, I would like to train as a internationally known profession qualification in general welding.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s